Vehicles
Sections
50 not categorized PORSCHE 997 ROD BOLTSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 GT3 2007-11 (includes uncategorized and accessory items) 99710317692 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions. View/Change Diagram
$213.40
Make a selection FVD10397501CARR Connecting rod with plc carr-6 screw. The s connecting screw (plc carr-6) needs only every third time to be changed under race conditions or motor sport use when overhauling the engine. When used in 997.1turbo connecting rod bearing 99310314715set must be used (tongue / nose opposite). Carrillo is one of the most respected connecting rod manufacturers in competitive motor sports. Carrillo rods are constructed from their propriety alloy and forged to their custom specifications. The rods are then fully machined to guarantee the removal of all surface imperfections. After heat treatment, each connecting rod is magnaflux inspected and hardness checked, then machined to final size. Each set is balanced and then sho...(choose a part on the right to read more)
$2,952.40
Make a selection 90110317302 High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 12 necessary per car.
From $3.30
Make a selection FVD10397505CARR Carrillo is one of the most respected connecting rod manufacturers in competitive motorsports. Carrillo rods are constructed from their proprietary alloy and forged to their custom specifications. The rods are then fully machined to guarantee the removal of all surface imperfections. After heat treatment, each connecting rod is magnaflux inspected and hardness checked, then machined to final size. Each set is balanced and then shot-peened to achieve the ultimate in strength and fatigue properties. The carrillo multiphase (carr) connecting rod bolt (sps-carr-6) is a high quality, aircraft standard fastener. Each bolt is manufactured with asymmetrical threads, each thread has a slightly different design than the ...(choose a part on the right to read more)
$2,952.40
Make a selection FVD10397599 Cp-carrillo's fastener assembly lube is molybdenum based lubrication grease with enhanced properties. This product offers an improved clamp load repeatability, greater resistance to high pressure and temperature (range -22f to 1200f), and no oil contamination. The coefficient of friction stays unchanged, even after several connecting rod bolt re-tightening and loosening processes. We highly recommend lubricating the connecting rod bolt head and thread with this lubricant. Be sure to add it to your order if you are replacing your rod bolts. Sold individually.
$16.50
Make a selection
$286.26
Make a selection BES99710260S01 "brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips General Fitment911 GT3 2007-11
$8,507.40
Make a selection FVD99710083B FVD 997 GT3 4.1 level 3 kit - max. Power - 485 hp (357 kw) @ 8100 rpm - max. Torque - 354 lb ft (480 nm) @ 5650 rpm - max. Speed - 198 mph (320 kph) - max. Rpm - 8600 rpm - acceleration 0-100 kph (0-62 mph)* - 3.7s * based on German tests done with kph. 100 kph = 62.137 mph the FVD conversion kit includes: mahle piston & cylinder set 4.1 l (106mm), 997.1 & 997.2 GT3/rs x 1 FVD software upgrade for 3.6 l to 4.1l with my genius flash tool x 1 bmc sport air filter for 997.1 GT3 x 1 intake manifold 4.0 l x 1 engine gasket set 997 GT3 x 1 cylinder head gaskets for 4.1 l FVD conversion x 2 cylinder base gasket for 4.1 l FVD conversion x 2 intermediate shaft bearings x 2 intermediate shaft thrust bearings x 2 connecti...(choose a part on the right to read more) General Fitment911 GT3 2007-11
From $14,548.75
Make a selection FSPOR997GT3SMB Product details: General Fitment911 GT3 2007-11
From $995.00
Make a selection FSPOR997GT3CMAX Product details: General Fitment911 GT3 2007-11
$2,295.00
Make a selection AP997240 Suspension has always been a specialty of agency power. With the current product list consisting of sway bars, control arms, sway bar links, and more, agency power has finally decided to add one more value to the Porsche suspension line up, the rear adjustable toe links. The stock suspension of the Porsche is a great start, but lacks a lot to improve cornering, adjust proper camber, and dial in the toe. These adjustable toe links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely then stock. The cnc machined links are made from 6061 aluminum.they are anodized blue to match other agency power products and then laser engraved with the ap logo...(choose a part on the right to read more) General Fitment911 1998-05911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
$599.95
Make a selection S1116FDL Upgrade your stock front swaybar with this simple bolt in replacement for the factory drop links. Left & right hand threaded rodends allow for simple length adjustment to eliminate swaybar preload. Correctly sized, precision, teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends. Eliminates the factory compliant plastic drop link bushings that deflect under loading and quickly wear out. High misalignment, stainless steel spacers allow for superior bind free operation and corrosion resistance. Precisely connects the stock or adjustable swaybar to the front strut assembly f...(choose a part on the right to read more) General FitmentBOXSTER 2005-08911 1998-05 911 GT3 2007-11 911 2005-08 CAYMAN 2006-08 911 GT3 2003-05
$354.00
Make a selection BBI9912020003 The bbi autosport 997 & 991 GT3 / rs exhaust side bypass is a direct replacement for the factory primary side mufflers. The primary mufflers are weigh approximately 44 pounds total while the bbi pipes are 4 pounds in comparison. For durability and protection against corrosion, each system is meticulously tig welded using 304 aerospace grade stainless tubing with lower carbon content. The result is a substantial reduction in weight behind the rear axle which significantly improves handling and less restriction to produce a much more aggressive exhaust note.
$950.00
Make a selection BES99715260S "brombacher" exhaust system for 997 GT3/rs General Fitment911 GT3 2007-11
$8,507.40
Make a selection FVD99710083A FVD 997.2 GT3 4.1- level 3 kit - max. Power - 500 hp (368 kw) @ 8100 rpm - max. Torque - 354 lb ft (480 nm) @ 5650 rpm - max. Speed - 198 mph (320 kph) - max. Rpm - 8600 rpm - acceleration 0-100 kph (0-62 mph)* - 3.7s * based on German tests done with kph. 100 kph = 62.137 mph the FVD conversion kit includes: - 4.1 liter pistons & cylinders - ecu software (handheld flash programmer) - sport air filter - complete engine gasket set - all necessary FVD designed hardware. (includes spark plugs, bolts, nuts, etc.) further additional parts/work required: - connection rods (22mm pin) FVD10397520 - modification of the water housing - modification of the customer's original crankcase we recommend the use of an m&m exha...(choose a part on the right to read more) General Fitment911 GT3 2007-11
From $14,537.44
Make a selection FSPOR997GT3RHDR Product details: General Fitment911 GT3 2007-11
From $1,995.00
Make a selection FSPOR997GT3DLT Product details: General Fitment911 GT3 2007-11
$650.00
Make a selection FSPOR997GT3CPKG Product details: General Fitment911 2005-08911 GT3 2007-11
$4,195.00
Make a selection BES99710260T - + 25 crank hp & + 25 crank torque General Fitment911 GT3 2007-11
$20,056.30
Make a selection 10021103000 This heat exchanger is engineered for the discerning Porsche 911 3.2 l owner looking for more performance. These are manufactured in stainless steel by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Features: gains of +10 hp and +10-15 tq stainless steel 1.5" pipe diameter for backpressure reduction 21.5 mm thick flange with "fire ring" connects "early style" dual inlet mufflers bolt on replacement for the right side re...(choose a part on the right to read more)
$1,733.60
Make a selection 1002110221DA This is a high-quality replacement for original number, 911 211 022 10 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car.
$1,329.90
Make a selection 10021102900 This heat exchanger is engineered for the discerning Porsche 911 3.2 l owner looking for more performance. These are manufactured in stainless steel. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Features: gains of +10 hp and +10-15 tq stainless steel 1.5" pipe diameter for backpressure reduction 21.5 mm thick flange with "fire ring" connects "early style" dual inlet mufflers bolt on replacement for the left side reduces the ...(choose a part on the right to read more)
$1,361.80
Make a selection RB2180 Racingbrake rotors are engineered and manufactured to meet the needs of the performance enthusiasts. from 3d cad design to tooling development, casting, machining, and surface coating, rb controls all production processes to insure quality, performance, and value. Their patented designs, combined with proprietary alloyed cast iron and precision machining assure you that rb brake products will achieve the highest level of performance. General Fitment911 TURBO/GT2 2001-05911 GT3 2007-11 911 TURBO/GT2 2007-09
$1,642.33
Make a selection 1002110211DA This is a high-quality replacement for original number, 911 211 021 60 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car. Please note: the corresponding right side i...(choose a part on the right to read more)
$1,329.90
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |